5kW~30kW Half Axle Electromagnetic Drive Plate
Rated power: 5kW ~ 30KW
Rated voltage and frequency: 380V
Voltage applicable range: 340v ~ 430v
Applicable ambient temperature: - 20 ~ 40 ¡ã C
Applicable ambient humidity: ¡Ü 95%
Power regulation range: 20% ~ 100%
Heat conversion efficiency: ¡Ý 99%
Effective power: 5kW ~ 30KW
Operating frequency: 5 ~ 40KHz
5kW ~ 30kW electromagnetic heating drive board can be applied to simple electromagnetic heating system or supporting automation system, and the communication interface between industrial 485 bus and computer is reserved to meet the interface requirements in automation control. It is suitable for electromagnetic heating drive of various powers, that is, it can be used for thousands of watts or tens of thousands of watts, and can drive 450A / 1200V IGBT at most It integrates all digital core controller and IGBT Driver. Only IGBT module, rectifier bridge, resonant capacitor, radiator and other devices can be added externally to form an electromagnetic heating system!
1. Connect power supply 220V
2 Transformer connection lines
3-4. Interface of IGBT
5. RS485 communication interface, Modbus RTU standard communication protocol
6. High speed automatic phase-locked tracking control system based on DSP
7. Power adjustment of potentiometer
8. External 24V working indicator light, constantly on during operation and flashing when not in operation
9. External 0.3A/24V DC fan interface
10. Soft start interface, close start, disconnect stop.
11. The external 10k potentiometer or 0-5V input or 4-20mA interface can be set through (F-22).
12. External load temperature detection interface 2, with an accuracy of up to 1¡æ
13. External load temperature detection interface 1, with an accuracy of up to 1¡æ. When using a single channel, default 1 is used to measure the external working temperature
14. IGBT temperature detection interface
15. External programmable operation display
Integrated with a fully digital core controller and IGBT driver, an electromagnetic heating system can be assembled by adding only IGBT modules, rectifier bridge stacks, resonant capacitors, heat sinks, and other components externally.
Suitable for single-phase 1-10KW electromagnetic heating drive, with a maximum drive of 150A/1200V IGBT
It can be applied to simple electromagnetic heating systems and can also be matched with automation systems, with reserved industrial 485 bus and computer communication interfaces to meet the interface requirements in automation control.
